One of the questions I get asked a lot in classes and workshops is how to achieve a pure white background without a lot of Photoshop knockout. Well, the short answer is to simply light your background about one stop brighter than your subject. In this case, my background is a 9 foot wide roll of white Savage 107X12-1 Seamless Background Paper – Super White.
. For the floor, I’ve used white tile board from The Home Depot which has two benefits: it is slightly reflective and it keeps people from standing directly on the seamless paper so your paper will last longer. Editors and graphic designers like a clean white background so that the subject could be plopped anywhere on the page without borders or easily extracted and placed on a different background.
For a full length portrait of one or two people, this is the basic lighting setup. As you can see we have separate lighting for the subject and the background so that we can control the background exposure separately. I like to have at least three or four flashes on hand for this, but it could be done with fewer lights as well. It will be quicker and easier with a handheld light meter. I use my light meter to measure the subject at f/8 for example, and my backdrop at about f/11 or f/13. A few important points:
- The background lights are aimed in a cross pattern (the camera right light is aimed at the camera left portion of the backdrop and vice versa) this ensures a more even light distribution.
- The background lights are flagged off from the camera, so there’s no flare or bounce directly at the lens that will decrease contrast.
- The subject is far enough from the background that they don’t enter the path of the background lights.
I like to light the subject first until I am satisfied with the light distribution/modeling on them, and then turn on the background lights later. Using softboxes rather than other modifiers on your subject will prevent spill and make the setup easier to understand as you build it up. A telephoto lens (about 85mm or longer) will help narrow your field of vision and keep distracting elements (like the sides of the backdrop) out of your photo. The above was shot at 85mm. Prime lenses tend to work better for this, as there will always be some light bouncing off of the backdrop and coming toward the camera.
For product images there are many possible configurations , but I find that plexiglass, painted white on the non shooting side, makes a great reflective surface. I set my product on a table with the plexiglass under it and shoot my background setup as seen above. The product table sits about where my portrait subject stands, about 8 feet away from the background. You’ll want to hit the top of the backdrop with some light as this will reflect down in the plexiglass and make it appear whiter. Its also helpful to turn all lights in your studio environment off so that you can see just the modeling lights and gauge what will happen when you click the ‘ol shutter button.
It is inevitable that some gray will sneak into your photos so I like to finish the photos off in Photoshop with the dodge tool set to “highlights”. Just run it gently over any areas that are not quite pure white. You can check your work by opening the info panel and as you run your mouse around the photo, the pure white areas will read “255” on all RGB values. As with all things photographic, practice makes perfect.
Thanks for reading and check out my subject above on Dr. Oz! We had a lot of fun shooting her at the studio here in San Diego and this is one of the outtakes from the session. Makeup and hair are by Stephanie Costa.
It’s no secret that the ‘ol Book of Faces can be a great marketing tool for photographers as well as just a generally fun place to show off some family photos. Facebook, however, has a tendency to compress, convert, or otherwise mangle your photos if you don’t do some image prep ahead of time to maximize their display quality. Here are some steps I’d recommend to optimize your images for Facebook display. I recommend using Photoshop but you could certainly mimic these settings in Lightroom or Capture One, for a more direct export.
The first thing we want to do is resize the image on our end before upload. (go to image>image size.) This will ensure that we have more control over the resize process and will also shorten the upload time. The current max size is 2048 pixels on the longest edge, so this is what I’d recommend. You can leave the PPI (“resolution”) value at 72. PPI is just a tag, and it doesn’t affect screen display.
I leave resample at “bicubic” and I will manually apply some sharpening in the next step. I like to do the sharpening manually, but you may find that a “bicubic sharper” resampling, or one of the other resize options does the trick for you without additional sharpening. Adobe recommends “bicubic sharper” for downsizing an image, but since I like to sharpen manually, I’ll stick with the standard bicubic. More info on that setting here.
Next I use “unsharp mask” to apply some sharpening. (go to filter>sharpen>unsharp mask). I like to do this manually so I can tinker with the sliders. For this type of image, I find that moderate settings are best but, for food or product photos, I may dial the settings up a bit. This is where your own personal taste comes in.
The final step is to save the image. I like to use the legacy “save for web window” – file>save>save for web (ctrl+alt+shift+s). You can also use file>export. I find that PNG format works best for Facebook (especially for images like this one that have a gradient background), but JPG also works just fine for most images when saved in the highest quality (100). Make sure if you are in something other than sRGB, that “convert to sRGB” is checked. Most browsers don’t obey color profiles, so sRGB is pretty much a web standard. I leave my copyright and contact metadata setting on as well. Stripping metadata will make the image smaller and faster to load, but I prefer to keep my copyright info embedded.
You’re done! Keep in mind that this method is for large 2048 pixel images. Cover photos will need to be exactly 851 pixels wide by 315 pixels high and profile photos will need to be 160 pixels by 160 pixels. Here is a guide to all the various image sizes used on social media.
If you prefer to automate the process for 2048 pixel images, you can download my free Facebook Resize Photoshop Actions below.